Hole Saws
back to products Annular hole cutters for magnetic drilling system
    Annular hole cutters with carbide theet for magnetic drilling system
    Hss hole saws with chip-breaker GP TECH
    Hss hole saws with chip-breaker GP TOP
    Hss hole saws with chip-breaker TIN coated
    Hss hole saws without chip-breaker GPT
    Carbide tipped holesaws GP INTEGRAL
    Carbide tipped hole saws - long series GP CARB
    Hss M42 bimetal hole saws GP COBALT
 
Annular hole cutters for magnetic drilling system

The Annular Hole Cutters GP BORE are made with HSS M2 and HSS M42. Suitable for Magnetic Core Machine, the GP BORE Annular Cutter produce a solid slug of steel which is ejected when the I cutter break through and the hole is complete.

This reduce the problems experienced by the swarf and chips generated by conventional drilling.

Suitable for all core machines with Weldon shank, the GP BORE Annular Cutter are available fram diam. 12 to 65 with WELDON shank diam. 19 mm and in inch size fram diam. 1/2" to 2" - 1/2" with WELDON shank diam. 3/4". Two different cut depth: 30 mm and 50 mm (metric sizes) and 1" -3/16" and 2" for the inch sizes.