Hole Saws
back to products Annular hole cutters for magnetic drilling system
    Annular hole cutters with carbide theet for magnetic drilling system
    Hss hole saws with chip-breaker GP TECH
    Hss hole saws with chip-breaker GP TOP
    Hss hole saws with chip-breaker TIN coated
    Hss hole saws without chip-breaker GPT
    Carbide tipped holesaws GP INTEGRAL
    Carbide tipped hole saws - long series GP CARB
    Hss M42 bimetal hole saws GP COBALT
 
Hss hole saws with chip-breaker GP TECH

HSS Hole Saws with functional characteristics that make it one of

the most frequently used cutters for STAINLESS STEEL, CAST IRON, ALUMINIUM up 13/32" of thickness.

The external depth of 1" 3/16 (about 30 mm) allows to hole curved surfaces where the thickness to hole is variable (i.e. tubes) with a considerable reduction of blockage of the tool.

Hole Saw made with steel M2 in inch sizes up 4"; from diam. 1" 5/16" up to 4" possibilities the hole saw are made with 2 hole to fit in the driver of the shank.